8 Tall Swing Set - 1 Bay - 1 ADA Swing Seat

Our swing sets are built with the safety and enjoyment of children in mind. Each bay can accommodate two children up to the age of 12, meeting strict ASTM and CPSC guidelines. And if you follow our installation instructions carefully, you can rest assured that your children will have a safe and secure play area. The durability of the set will depend on various factors such as the quality of the installation, the type of soil, and the amount of use it receives. That s why we do not specify weight limits for our swing sets. However, you can trust that our heavy-duty design will provide a stable and reliable structure for your little ones to swing and play on. This in-ground standard 8-foot-high set comes with customizable End Frame Fittings and an ADA swing. Choose your preferred color scheme to match your backyard s aesthetic. With proper maintenance, this set should last for up to 5 years in optimal conditions and can provide years of fun memories for your children. However, some conditions may require earlier replacement, so keep that in mind when planning for your backyard play area. TOOLS AND PARTS NEEDED: Ladder, ¾” wrench, Ratchet socket wrench, Tape measure, A5750 supplied Allen wrench for shackles, and 6mm Allen wrench for set screws. Stakes for marking holes. Shovel, Bricks, Gravel, Wheelbarrow for mixing concrete, Water, Concrete, Trowel, Level, Warning signs.   Protective surfacing according to ASTM F1292 for a fall height of 8’. PARTS INCLUDED ARE: A2925 – 2 blue or green             A1200 – 1 black, blue, green, red or yellow A2014 – 2                                 A7500 – 2 – 6’ / 2 – 2.5’ A5700 – 2                                 Pipe Legs A – B - 11.5’ - 4 A5730 – 2                                 Top Rail 6’ - 1 A5750 - 1 MEASUREMENTS FOR SWING FRAME: The legs are 150” apart lengthwise at ground level. The legs are 93” wide at ground level. Below ground, the legs are 165” lengthwise and the width below ground is 115”. Height is 8’ **INSTALLATION, SAFE USE & MAINTENANCE INSTRUCTIONS** IMPORTANT: To keep children safe from harm, follow these precautions and instructions when installing, using, or maintaining this playground equipment. You can also call us at 1-800-227-7529 for more information or see https://www.cpsc.gov/cpscpub/pubs/324.pdf . Installation: Read all instructions before attempting assembly. To determine proper use zones needed for swing set consult Figure 23, Table 7 for c ommercial swing sets if upgrading to a commercial swing. For residential sets see spacing dimensions on Page 4 of the Outdoor Home Playground Safety Handbook. Install swing set where a child can easily be supervised.   Do not install playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and environmental factors can reduce their shock absorbing effectiveness. Carpeting and thin mats are generally not adequate protective surfacing. Install your play equipment on level ground with adequate surfacing and anchoring. Use proper hardware, and tighten all connections. Lay out all the pipes and end frame fittings on the ground about two feet from where you have determined you want to place your swing set.   Do not dig holes until frame is assembled, as there may be some variance in leg spacing. Slide the two end frame fittings on each end of the top pole with the two legs of the end frame fittings, pointing down. You may have to force pipes into end pipe openings. Tighten the two included set screws on the top of each of the end frame fitting, using the 6mm Allen wrench.   Attach swing hangers. The hangers should be spaced 2 ft from the end of the set and 2 ft apart. Place the two halves of the hanger around the top rail of the swing set. The swinging shackle pendulum will be facing downwards. The side bolts are placed with the heads on the top of the hanger and the thread