Scoop Slide with 1 Top and 1 Bottom - Commercial Grade

Are you in the market for an exciting slide for your playset? Check out our rotational molded polyethylene scoop slide! We can ship it directly to you via UPS. The entrance measures 21 x 26.75 x 15 and weighs 15 lbs while the exit is 40 x 24.75 x 21.5 and weighs 28 lbs. The seat is a comfortable 8.5” from the ground. Plus, if you want to make the slide even longer, additional inserts can be added. Keep in mind that if your deck height is over 10 , it s recommended that the slide be installed on a hillside. This product is built to last 2 years even in harsh conditions and up to 5 years in optimal conditions. However, some conditions may require replacement sooner. The slide can support up to 300 lbs. Slide                            Deck                                          Angle                Screws Sent w/order Length                       Height                                         Ratio 65”                   1 top – 1 bottom – 1 insert 3’                 0.4307692         8 bolts - 8 nuts - 4 plugs - 16 washers 83”                   1 top – 1 bottom – 2 inserts 4’               0.4819277         12 bolts - 12 nuts - 6 plugs - 24 washers 100”                 1 top – 1 bottom – 3 inserts 5’               0.53                  16 bolts - 16 nuts - 8 plugs - 32 washers 117”                 1 top – 1 bottom – 4 inserts 6’               0.5470085         20 bolts - 20 nuts - 10 plugs - 40 washers 135”                 1 top – 1 bottom – 5 inserts 7’               0.562963          24 bolts - 24 nuts - 12 plugs - 48 washers 175”                 1 top – 1 bottom – 7 inserts 8’               0.4971429         28 bolts - 28 nuts - 14 plugs - 56 washers 192”                 1 top – 1 bottom – 8 inserts 9’               0.515625          32 bolts - 32 nuts - 16 plugs - 64 washers 210”                 1 top – 1 bottom – 9 inserts 10’              0.5285714         36 bolts - 36 nuts - 18 plugs - 72 washers **Installation, Safe Use and Maintenance Instructions** IMPORTANT: Please read for important information. In this material we have tried to provide some requirements stated in the CPSC Handbooks, ASTM F2373-11, F1487-11 and F1148-09. However, we in no way intend for this to be a complete list of requirements. Also these publications are updated frequently with changes therefore, you should read these publications yourself to determine if any part or installation could prove a danger to a child. To help keep children safe from harm, review installation and maintenance instructions before installing equipment. These are located in the description of every product on our website. www.americanswing.com    Download and print these instructions and keep in a safe place. Our website also has a “Product Testing Information” page. All products are tested for lead, phthalates and tensile strength. You can also call us at 1-800-433-2573 for more information or see https://www.cpsc.gov/cpscpub/pubs/325.pdf . Due to the thermo dynamics and lower heat transfer properties of plastics, plastic slides are preferred over metal slides for play equipment. Although plastic slides may become as hot as metal, they insulate better and don’t transfer the heat as quickly. Because of these properties, the Consumer Product Safety Commission (CPSC) recommends plastic slides and plastic surfaces over bare metal. Regardless of lower heat transfer properties, plastic play equipment can still become hot enough ‐‐ in extreme temperatures and direct sunlight ‐‐ to cause burns. Plastic slides are safe, tried and true, but as is the case with all playground equipment, parents and supervisors must monitor the children in their care, make certain that the equipment is appropriate for their age, and always check playground surfaces for excessive heat before allowing children to play. For more information, contact IPEMA headquarters at ww **************** @ *** ma.org or by calling 1-717-238-1744. WARNING: Instruct children to never run up the slide and to slide down